E-katalog skupiny BLOCK®
Ceiling swirl diffusors 108.92/A
PRODUCT DESCRIPTION
The outlet elements are used to distribute the air to the room. Most often, swirl diffusers are used, which allow a rapid reduction of the flow rate of the supplied air and its even mixing with the air in the room. Perforated sheet metal is used for free and even air supply to the room.
|
|
|
 Perforated sheet |
|
CEILING MOUNTING
- The standard attachment of the output element is by means of a central screw, which is anchored to the cross member located in the housing of the attachment.
- The size of the attachment depends on the size of the filter and its bearing surface.
BENEFITS
|
|
Air flow through the Block diffusor |
SUITABLE FOR AREAS
- Pharmacy, biotechnology, medical devices
- Microelectronics, optics, automotive, electrical engineering
- Healthcare
- Engineering, food, chemical industry, etc. industry
TECHNICAL DATA
| Type |
|---|
| Ceiling swirl diffusors |
| Type of HVAC attachment |
|---|
| extension to a light metal ceiling with a grid of 625 mm |
| extension to the panel ceiling |
| The size of the filter in the attachment |
|---|
| attachment without filter |
| filter 305×305 mm |
| filter 475×475 mm |
| filter 570×570 mm |
| Exhaust element |
|---|
| swirling diffuser with fixed slats |
| swirling diffuser with manually adjustable slats |
| ceeling diffuser |
| perforated metal sheet |
| Swirling vent-grille BLOCK |
| Swirling vent-grille BLOCK |
| Surface of the diffusors |
|---|
| Komaxit powder coating in RAL 9016 |
| Stainless steel AISI304 |
| Komaxit powder coating in RAL shade |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |