E-katalog skupiny BLOCK®
Ceiling panels, partially pass-through 105.04/C
Ceiling panels are designed for the construction of suspended ceilings where limited movement of persons on the top side of the suspended ceiling is expected during installation and service work.
Compared to suspended ceilings with tiles, panel ceilings are much stronger and they have better thermal and noise-dampening insulation properties. After cutting out openings, it is possible to install light fixtures, Purofil filtration adapters or HVAC adapters.
TECHNICAL DATA
| Panel type |
|---|
| Ceiling panels are partially walkable / Reinforcements along the perimeter / |
| Panel thickness |
|---|
| 100 mm |
| 120 mm |
| 60 mm |
| 80 mm |
| Panel width W x Panel length L | |
|---|---|
| width | length |
| 560 mm | 3000 mm |
| 1190 mm | 3000 mm |
| Width 560 mm, Height 1190 mm*Width according to customer's requirements - atypical.It is possible to order atypical dimensions according to specific requirements. Min. panel dimension 300 mm, max. panel dimension 1190 mm.Length 3000 mm.Length according to customer's requirements - atypical. Maximum length 4000 mm.Min. 1500 mm. Recommended finish: 1190x3000 560x3000 | |
| Panel installation |
|---|
| installation of panels not included in delivery |
| mounting clips and screws (M10 threaded rod with welded metal sheet, M8 screw) x 3 - total number of pieces for panel |
| installation of panels directly (M8 threaded bar, supporting metal sheet, TEX 4.8) x 3 - total number of pieces for panel |
| Facing hue and material - standard on the visible side |
|---|
| galvanized metal sheet, hue RAL 1015 |
| galvanized metal sheet, hue RAL 6027 |
| galvanized metal sheet, hue RAL 9002 |
| galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| galvanized metal sheet |
| Powder coating (Komaxit), hue RAL |
| Facing hue and material - standard on the rear side |
|---|
| Filler |
|---|
| Mineral wool |
| PSE - foam polystyrene |
| Styrofoam IB (cannot be used for thermochambers) |
| Facing hue and material - standard on the visible side |
|---|
| galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| galvanized metal |
| Powder coating (Komaxit), hue RAL |
| Facing hue and material - standard on the rear side |
|---|
| galvanized metal sheet, hue RAL 9016 |
| galvanized metal |
| galvanized metal sheet Powder coating (Komaxit), hue RAL |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |