Stainless steel sinks 215.04/B
- A stainless steel sink assembly consists of a worktop, in which a stainless steel basin is welded, and a supporting frame. The removable rack above the sink is used as a shelf. The legs feature standard adjustable feet allowing to adjust the basin height (approx. 30 mm).
- Dimensional range
- simple sink: 600x600x600 mm
- combined sink: 600x680x1100 mm
TECHNICAL DATA
| Type designation |
|---|
| Stainless steel sink GMP |
| Sink version |
|---|
| value | width | height | depth |
|---|
| Simple sink | 600 mm | 600 mm | 600 mm |
| Combined sink | 600 mm | 1100 mm | 680 mm |
| Door for service |
|---|
| service door from the front |
| service door from the left |
| service door from the right |
| Variation of basic profile design |
|---|
| Stainless steel basic profil, 50mm |
| the basic profile is covered with flooring, 50mm |
| Assembly of the basic profile |
|---|
| stands back and at the left of the wall |
| stands back and to the right of the wall |
| stands back at the wall |
| Mixer |
|---|
| Single lever mixer - Not part of the sink (combined) |
| single lever on the wall |
| Single lever mixer (simple) |
| Single lever pillar mixer with pull-out spout (simple) |
| Sink |
|---|
| Stainless steel AISI 304 (simple) |
| Stainless steel AISI 316 (simple) |
| Plastic (simple) |
| Anchoring to floor |
|---|
| anchoring to floor |
| sink is not anchored |
| Atypical execution Water trap |
|---|
| Typical execution |
| Atypical execution |
Typical execution
0 - clear choice from the options
Atypical execution
Q - Atypical design, which can not be clearly identified by means of code |
