E-katalog skupiny BLOCK®
Step-over bench - Pass-through 216.20/B
Step-over benches, along with other elements for clean areas, create a comprehensive range of products to meet the most demanding requirements of a designer of material pass-throughs or personnel pass-throughs.
- It is made of laminated chipboard with ABS edged in white finish. The removable shelves for shoes are made of metal sheet, with thermosetting powder coat hue RAL 9016.
- The cabinet comes with a plinth 50 mm.
- It is used to store shoes. A step-over bench creates an imaginary line of spatial cleanliness in the pass-through.
- The bench can be combined with high cabinets for storing clothes, shoes or a sink cabinet
- We offer two variants of benches - single-sided and double-sided.
DIMENSIONAL RANGE
| step-over bench | deep bench | |
| width (mm) | 800, 1000, 1250, 1550 | 800, 1000, 1250, 1550 |
| depth (mm) | 330 | 400, 450, 500 |
 |
| PL1 - Single-sided step-over bench |
 |
| PL2 - Double-sided step-over bench |
TECHNICAL DATA
| Type |
|---|
| Step-over bench, deep bench |
| Type marking | ||
|---|---|---|
| value | width | depth |
| Step-over bench | 800, 1000, 1250, 1550 mm | 330 mm |
| Deep bench | 800, 1000, 1250, 1550 mm | 400, 450, 500 mm |
| Material design | |
|---|---|
| Material | |
| Body is made of laminated boards th. 18mm desk of HPL th. 12mm | Standard plus* |
| Bench is made of stainless steel, th. panel 22 / 30 mm | Premium 304 |
| Bench type |
|---|
| 400 mm |
| 400 mm |
| 400 mm |
| Depth of bench | ||
|---|---|---|
| depth | value | |
| 330 mm | Step-over bench | PL1, PL2 |
| 400 mm | Deep bench | HL1 |
| 450 mm | Deep bench | HL1 |
| 500 mm | Deep bench | HL1 |
| Width, internal division | |
|---|---|
| width | |
| 800 mm | PL1, PL2. HL1 |
| 1000 mm | PL1, PL2. HL1 |
| 1250 mm | PL1, PL2. HL1 |
| 1550 mm | PL1, PL2. HL1 |
| X mm | PL1, PL2. HL1 |
| * for an atypical dimension, the determination of the internal division (number of compartments) is based on the nearest offered dimension so that the internal width of the compartment is not less than 240 mm | |
| Plinth 50 mm | ||
|---|---|---|
| height | value | |
| 50 mm | Basic profile covered with floor covering. For new floor covering | PL1, PL2, HL1 |
| 50 mm | Metal profile with surface finish RAL 9016. For the existing floor covering | PL1, PL2, HL1 |
| 50 mm | Basic stainless steel profile, for existing floor. | PL1, PL2, HL1 |
| mm | atypical | PL1, PL2, HL1 |
| * basic color design (white RAL9016 / gray RAL7035) ** basic height of the plinth is 50mm. If the height of the plinth is atypical, for example 80 mm, then the total height of the bench will be 430 mm. Please note that the total height of the bench should not be higher than 450 mm in terms of ergonomics. | ||
| Surface finish | |
|---|---|
| value | |
| corpus white / top plate HPL chalk | Standard plus |
| corpus white /top plate HPL gray | Standard plus |
| corpus gray / top plate HPL gray | Standard plus |
| Stainless steel AISI304, finished SB | Premium 304 |
| Atypical - optional colour finish | |
| * possibility of another color for the body and the top plate (choice of above-standard colors for an additional charge according to cat. no.212.02) | |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |