Stainless steel washing tables 215.03/D
- Stainless steel washing tables, along with the other elements of the Forlab stainless steel system, are a complete kit for setting up any furniture assembly that meets the customer’s requirements. The table consists of worktop, frame and additional covering.
- The worktop consists of a P1.5 stainless steel sheet facing with a welded-in sink(s) and a laminate filler. From the perspective of design, it may be simple, with indentation (raised edge ) or with edge raised by 40 mm.
- The frame is composed of H-shaped side legs and reinforcement bolted to the side legs. The legs feature standard adjustable feet allowing to adjust the table height (approx. 30 mm). When assembling two tables, one central leg, instead of two legs, is used for joining the two tables. The sheet covering may be one-sided, two-sided or three-sided.
| Dimensional range: |
| Width (mm) |
900; 1200; 1500; 1800 |
| Depth (mm) |
600; 750; 900 |
| Height (mm) |
900 |
TECHNICAL DATA
| Type designation |
|---|
| Washing table GMP |
| Table frame material |
|---|
| Table frame material AISI 304 FIN SB |
| atypical |
| Worktop material |
|---|
| Worktop material- stainless steel AISI 304 |
| Worktop material- stainless steel AISI 316 |
| atypical |
| Table construction type |
|---|
| Worktop design - Smooth without edges |
| Worktop design – Smooth with indentation along the perimeter |
| Width "A" |
|---|
| value | width |
|---|
| Width | 900 mm |
| Width | 1200 mm |
| Width | 1500 mm |
| Width | 1800 mm |
| Depth "B" |
|---|
| depth | value |
|---|
| 600 mm | Depth |
| 750 mm | Depth |
| 900 mm | Depth |
| Sink dimensions |
|---|
| dimension | value |
|---|
| 400×400×250 | Sink |
| 400×400×300 | Sink |
| 500x400x250 | Sink |
| 500x400x300 | Sink |
| 500x500x300 (*) | Sink |
| 600x450x300 (*) | Sink |
| 600x500x300 (*) | Sink |
| 1280x510x215 (***) | Bath |
| 1280x510x340 (***) | Bath |
| 510x310x215 | Bath |
| 630x510x215 (*) | Bath |
| 960x510x215 (**) | Bath |
| 960x510x340 (**) | Bath |
(*) Sinks for table depth 750 and 900 mm.
(**) Vevařovací vany for table width 1500 and 1800 mm and table depth 750 and 900 mm
(***) Vevařovací vany for table width 1500 and 1800 mm and table depth 750 and 900 mm |
| Number and location of sinks |
|---|
| Two sinks |
| Two sinks on the right |
| Two sinks on the left |
| Sink on the left |
| Sink on the right |
| Sink in the middle |
| Mixer |
|---|
| without |
| mixer on the wall |
| Single lever mixer |
| Single lever pillar mixer with pull-out spout 00 - None |
| Water trap |
|---|
| value | Material |
|---|
| Water trap | Stainless steel AISI304 |
| Water trap | Stainless steel AISI316 |
| Water trap | plastic |
| Variant of basic profile |
|---|
| Basic profile Stainless steel AISI304, 50mm |
| Basic profile is covered with flooring, 50mm |
| another solution |
| Atypical execution |
|---|
| Typical execution |
| Atypical execution |
Typical execution
0 - clear choice from the options
Atypical execution
Q - Atypical design, which can not be clearly identified by means of code |
