E-katalog skupiny BLOCK®
X-ray door 104.08/C
Together with the casing, the metal X-ray door represents one of the basic elements to construct clean workplaces and areas with protection against X-radiation.
The door is of the sandwich type. The facing of the door leaf consists of a molded tile produced by precision molding. Reinforcements from galvanized steel sheet are glued-in along the perimeter of the facing
in order to increase the rigidity of the door leaf, the mounting of the hinge and the lock.
Standardly, the filler is mineral wool with an auxiliary HPS board and a shielding lead insert, which is supplied in thicknesses of 0.4 mm ÷ 3 mm. Shielded casing with protection against X-rays is also part of the door.
TECHNICAL DATA
| Door type |
|---|
| X-ray door |
| Swing direction |
|---|
| left |
| right |
| Finish |
|---|
| single wing |
| double wing |
| Door dimensions | |
|---|---|
| width | height |
| 1300 mm | 2010 mm |
| 1500 mm | 2010 mm |
| 700 mm | 2010 mm |
| 900 mm | 2010 mm |
| Thickness of shielding lead insert |
|---|
| 1 mm |
| 1.5 mm |
| 2 mm |
| 3 mm |
| Glazing |
|---|
| usual glazing 400x920 |
| solid without glazing |
| atypical |
| Hinge type |
|---|
| atypical |
| Dr. Hahn hinges, RAL 9016 |
| In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing.Atypical finish - the customer requires a different hue than the casing - according to RAL colour standard. |
| Type of door control |
|---|
| automatic operator |
| atypical |
| manual |
| door closer |
| I. Hardware - on the side of hinges |
|---|
| handle (S7-R,S) |
| fixed doorknob (S7-R,S) |
| elbow switch (S7-E) |
| not included in delivery |
| panic hardware (S7-R,S) |
| sensor switch (clean switch) |
| button (S7-E) |
| operable doorknob (S7-R,S) |
| stainless steel plug |
| II. Hardware - on the opposite side of hinges |
|---|
| handle (S7-R,S) |
| fixed doorknob (S7-R,S) |
| elbow switch |
| not included in delivery |
| panic hardware |
| sensor switch (clean switch) |
| button (S7-E) |
| operable doorknob (S7-R,S) |
| stainless steel plug |
| Cylindrical insert |
|---|
| without cylindrical insert and lock openings are not ready (for S7) |
| standard cylindrical insert |
| not included in delivery |
| atypical |
| Drop seal |
|---|
| without strip |
| atypical |
| dropseal |
| Casing mounting |
|---|
| finish for partition panels |
| Casing thickness |
|---|
| 120 mm |
| 100 mm |
| 80 mm |
| 60 mm |
| Facing hue and material |
|---|
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| Powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| Atypical design |
| In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes. |
| Casing hue and material |
|---|
| Galvanized metal sheet, powder coating (Komaxit), hue RAL 9016 |
| Stainless steel AISI 304 |
| powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| Atypical design |
|---|
| type design |
| atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |