E-katalog skupiny BLOCK®
PUROFIL terminal diffusers for lightweight metal suspended ceiling (LK) 108.01/E
PUROFIL terminal diffusers are intended as an end filtration element in the air distribution system for environments with high demands for the purity of incoming air - such as operating theatres, sterilisation rooms, intensive care units, different areas in pharmaceutical industry, electrical engineering industry, mechanical engineering industry, food industry, etc.
Adapters are produced in several dimensions of facing, according to HEPA filter size.
To distribute incoming air, the adapters are fitted with a swirling vent-grille or a perforated element at the bottom.
TECHNICAL DATA
| Type of product |
|---|
| PUROFIL terminal diffusers for lightweight metal suspended ceiling |
| A - old system (until 06/2005), B - old system (until 06/2009), C - new snap-on system - compatible with the innovated lightweight metal suspended ceiling and light fixtures (since 06/2009), D - new designation (since 05/2013), E - change of designation as of 10/2015 (filter corner clamps, 8 mm end element for the middle screw in the girder) |
| Filter dimensions |
|---|
| Filter dimensions 305 x 305 x 117 |
| Filter dimensions 457 x 457 x 117 |
| Filter dimensions 570 x 570 x 117 (cannot be used in the 600 grid) |
| filter dimension tolerance + 0 / -0.5 mm |
| Air intake |
|---|
| side with round neck |
| side with rectangular neck |
| upper with round neck |
| Size of inlet neck |
|---|
| rectangular neck 120x265, for transition Ø200 |
| rectangular neck 120x417, for transition Ø250 |
| rectangular neck 145x530, for transition Ø315 |
| rectangular neck 80x265, for transition Ø160 |
| rectangular neck 80x417, for transition Ø200 |
| rectangular neck 95x530, for transition Ø250 |
| round neck diameter 160 |
| round neck diameter 200 |
| round neck diameter 250 |
| round neck diameter 315 |
| Damper |
|---|
| Damper (for side round inlet only) |
| without damper |
| Transition piece |
|---|
| without transition |
| one-sided HVAC transition piece |
| Standard suspended ceiling dimensions |
|---|
| ceiling grid dimensions 600x600 |
| ceiling grid dimensions 625x625, preferred |
| Surface of the visible surfaces of the adapter |
|---|
| Stainless steel AISI 304 SB (cannot be used for section S10 Exhaust element for item AN) |
| thermosetting powder coat Komaxit, standard hue RAL 9016 |
| Powder coating (Komaxit), hue RAL |
| Atypical execution |
|---|
| Typical execution |
| Atypical execution |
| Typical execution 0 - clear choice from the options Atypical execution Q - Atypical design, which can not be clearly identified by means of code |