E-katalog skupiny BLOCK®
PUROFIL terminal diffusers for panels 108.04/A
PUROFIL terminal diffusers are intended as an end filtration element in the air distribution system for environments with high demands for the purity of incoming air - such as operating theatres, sterilisation rooms, intensive care units, different areas in pharmaceutical industry, electrical engineering industry, mechanical engineering industry, food industry, etc.
Adapters are produced in several dimensions of facing, according to HEPA filter size.
To distribute incoming air, the adapters are fitted with a swirling vent-grille or a perforated element at the bottom.
TECHNICAL DATA
| Type of product |
|---|
| PUROFIL terminal diffusers for panels |
| Panel thickness |
|---|
| Panel thickness 60 mm or 62 mm |
| Panel thickness 80 mm or 82 mm |
| Panel thickness 100 mm or 102 mm |
| Panel thickness 120 mm or 122 mm |
| Other panel thickness in mm |
| Filter dimensions |
|---|
| Filter dimensions 305x305x117 |
| Filter dimensions 457x457x117 |
| Filter dimensions 570x570x117 |
| filter dimension tolerance + 0 / -0.5 mm |
| Air intake |
|---|
| side with round neck |
| side with rectangular neck |
| upper with round neck |
| Size of inlet neck |
|---|
| rectangular neck 120x265, for transition Ø200 |
| rectangular neck 120x417, for transition Ø250 |
| rectangular neck 145x530, for transition Ø315 |
| rectangular neck 80x265, for transition Ø160 |
| rectangular neck 80x417, for transition Ø200 |
| rectangular neck 95x530, for transition Ø250 |
| round neck diameter 160 |
| round neck diameter 200 |
| round neck diameter 250 |
| round neck diameter 315 |
| Damper |
|---|
| Damper (for side round inlet only) |
| without damper |
| Transition piece |
|---|
| without transition |
| one-sided HVAC transition piece |
| Frame for covering cut out openings |
|---|
| No frame |
| Frame |
| Surface of the visible surfaces of the adapter |
|---|
| Stainless steel AISI 304 SB (cannot be used for section S10 Exhaust element for item AN) |
| thermosetting powder coat Komaxit, standard hue RAL 9016 |
| thermosetting powder coat Komaxit, hue RAL |
| Atypical execution |
|---|
| Typical execution |
| Atypical execution |
| Typical execution 0 - clear choice from the options Atypical execution Q - Atypical design, which can not be clearly identified by means of code |