E-katalog skupiny BLOCK®
/
TECHNICAL DATA
| Door type |
|---|
| basic hinged door H |
| Swing direction |
|---|
| left |
| right |
| Finish |
|---|
| single wing |
| double wing |
| Door dimensions |
|---|
| 1100x2010 |
| 1300x2010mm (active wing width 900mm) |
| 1500x2010mm (active wing width 900mm) |
| 1700x2010mm (active wing width 900mm) |
| 700x2010 |
| 900x2010 |
| In the case of an atypical active door wing, it is necessary to specify the dimensions of the active wing as part of the code. For example 1800/900/x2010 (clear width 1800, active wing 900, passive wing 900). |
| Door thickness | |
|---|---|
| thickness | value |
| 42 mm | for partition 52 mm |
| Grounding for zone I and II |
|---|
| Earthing for zone I and II |
| Earthing has not been done |
| Atypical |
| Hinge type |
|---|
| Dr. Hahn |
| Atypical |
| In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing. Atypical finish - the customer requires a different hue than the casing - according to RAL colour standard. |
| Glazing size |
|---|
| usual glazing 400x920 |
| solid door without glazing |
| atypical |
| The atypical dimension of the glazing should be noted in the note. In the case of double doors, only the active wing will be glazed. |
| Glazing glass type |
|---|
| laminated safety glass, thickness 6 mm |
| mirror glazing 2/3 on side of hinge 400x1450mm |
| mirror glazing on opposite side of hinge 400x1450mm |
| atypical |
| Mirror size 400x1450 mm for all door dimensions. |
| Blinds type |
|---|
| without blinds |
| magnetic blinds |
| mechanical blinds |
| atypical |
| Standard hue of blinds S156 (silver) according to the manufacturer's sample book, custom hues according to RAL colour standard. |
| Blinds location |
|---|
| on side of hinges |
| on opposite side of hinges |
| HVAC grille |
|---|
| without HVAC grille |
| grille 400x400 (VPR+VPK) |
| atypical |
| Standard colour finish is the colour of the door wing. |
| Type of door control |
|---|
| automatic operator |
| manual |
| door closer |
| atypical |
| Warning - in the case of double wing door with self-closers on both wings, the door closing coordinator shall be specified. |
| I. Hardware - on the side of hinges |
|---|
| handle |
| fixed doorknob |
| elbow switch (S10-E) |
| one-point panic exit push device |
| sensor switch (clean switch) |
| button (S10-E) |
| operable doorknob |
| stainless steel plug |
| not included in delivery |
| atypical |
| II. Hardware - on the opposite side of hinges |
|---|
| handle |
| fixed doorknob |
| elbow switch (S10-E) |
| one-point panic exit push device |
| sensor switch (clean switch) |
| button (S10-E) |
| operable doorknob |
| stainless steel plug |
| not included in delivery |
| atypical |
| Cylindrical insert |
|---|
| openings for lock and insert have not been cut out |
| standard cylindrical insert |
| not included in delivery |
| atypical |
| For S10-E it is always C0 - the opening is not cut out. |
| Drop seal |
|---|
| Dropseal ELLEN MATIC 2K |
| without strip |
| atypical |
| Protective bumper, kick plate - dimensions and finish must be specified in the notes to the door order. |
| Casing mounting |
|---|
| finish for a plasterboard wall (HSE) |
| finish for a double partition |
| finish for partition panels |
| finish for Surgical |
| atypical |
| When ordering door frames type "H" in the company HSE, it is necessary to state in the order: Door frames H DZD for FOR CLEAN |
| Casing thickness |
|---|
| 52 mm |
| 100 mm |
| 145 mm |
| in the case using of the additional 25 mm column MS-156, it is necessary using of notes: 1 - additional column on the hinge side 2 - additional column on the opposite side of the hinges |
| Indication |
|---|
| Without indication |
| with indication on the right on side without hinges SP-OZ |
| with indication on the right on side of hinges SP-PZ |
| with indication on the left on side without hinges SL-OZ |
| with indication on the left on side of hinges SL-PZ |
| with double-sided indication on the left SP-O/P |
| with double-sided indication on the right SP-O/P |
| atypical |
| Door wing blocker |
|---|
| without el. blocker |
| electromechanical solenoid lock ST-DB 100 |
| atypical |
| Facing hue and material |
|---|
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| Powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| atypical design |
| In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes. |
| Casing hue and material |
|---|
| Galvanized metal sheet, powder coating (Komaxit), hue RAL 9016 |
| Stainless steel AISI 304 |
| Galvanized metal sheet, powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |