E-katalog skupiny BLOCK®
BENCHES 216.21/B
 |
 |
DESCRIPTION:
- Benches complete the range of facilities for personnel pass-through.
- They are free-standing or attached to the partition panel and covered, without internal storage space
- They can be combined in size with high cabinets for storing clothes and shoes or sink cabinets
DIMENSIONAL RANGE:
| Width (mm) | 800, 1000, 1250, 1550 | |
| Depth (mm) | 400, 450, 500 |
Benches BL1:
- Benches for clean areas Class „B“
- Stainless steel plate fitted to a galvanised metal substructure.
- Sides which do not touch walls of the room are fitted with additional covering using partition panels on a basic profile with a height of 50 mm.
- The basic profile is coated with flooring or treated with thermosetting powder coating RAL 9016.
 |
 |
| Benches BL1 |
Benches CL5:
- Benches for personal pass-trough Class „C, D, CNC“
- Laminated board with an ABS edge, fitted to a metal structure on adjustable feet.
- Feet ends are capped to suit the clean areas.
- The frame is treated with thermosetting powder coat RAL 9016/ 7035
Benches CL6:
- Benches for personal pass-trough Class „C, D, CNC“
- Stainless steel plate fitted to a stainless steel structure on adjustable feet.
- Feet ends are capped to suit the clean areas.
- The entire bench is made of stainless steel AISI 304, with surface finish SB.
 |
 |
| Free-standing banches (CL05, CL06) |
TECHNICAL DATA
| Type designation | ||
|---|---|---|
| value | width | depth |
| Benches | 800, 1000, 1250, 1550 mm | 400, 450, 500 mm |
| Articulation |
|---|
| Standard plus * |
| Premium 304 |
| * benches in the Standard plus design are also designed for equipment in the Standard design |
| Bench type | |
|---|---|
| Material | |
| Stainless steel plate mounted on a metal base and covered with stainless steel sheet mounted on a basic profile height of 50 mm. | Premium 304 |
| Bench board made of high-pressure laminate mounted on a metal base in RAL color | Standard plus |
| The whole bench is made of stainless steel AISI 304, ground surface SB | Premium 304 |
| The benches have a standard height of 400 mm. | |
| Bench depth | |
|---|---|
| depth | |
| 400 mm | BL1, CL5, CL6 |
| 450 mm | BL1, CL5, CL6 |
| 500 mm | BL1, CL5, CL6 |
| Bench width | |
|---|---|
| width | |
| 800 mm | BL1, CL5, CL6 |
| 1000 mm | BL1, CL5, CL6 |
| 1250 mm | BL1, CL5, CL6 |
| 1550 mm | BL1, CL5, CL6 |
| xxx mm | BL1, CL5, CL6 |
| Additional size definition: Indicate the additional size (in mm) after the Q symbol. | |
| Plinth 50 mm |
|---|
| BL1 |
| BL1 |
| BL1 |
| CL5, CL6 |
| * basic color design (white RAL9016 / gray RAL7035) ** basic height of the plinth is 50mm. If the height of the plinth is atypical, for example 80 mm, then the total height of the bench will be 430 mm. Please note that the total height of the bench should not be higher than 450 mm in terms of ergonomics. *** Termination on adjustable legs with ends to clean areas. |
| Additional overing | |
|---|---|
| value | |
| front and left covering | BL1 AISI304 |
| front and right covering | BL1 AISI304 |
| front covering | BL1 AISI304 |
| front, right and left covering | BL1 AISI304 |
| without covering | CL5, CL6 |
| A part of the covering is also a set of anchoring angles according to the material design. The number of anchoring brackets is specified by the manufacturer. | |
| Colour finish | |
|---|---|
| value | |
| Laminated board with an ABS edge, color-white, fitted to a metal structure RAL 9016 | CL5 |
| Laminated board with an ABS edge, color whitefitted to a metal structure RAL 9016 | CL5 |
| Laminated board with an ABS edge, color grey, fitted to a metal structure RAL 7035 | CL5 |
| Stainless steel AISI 304, finished SB | BL1, CL6 |
| Non-standard - optional colour finish | CL5 |
| * fixed color two-combination bench (base / top plate HPL) ** possibility of another color combination (choice of above-standard colors for extra charge according to cat.no.212.02) | |
| Non-standard design |
|---|
| Standard design |
| Non-standard solution |
| Standard design 0 - clear specification out of offered options Non-standard design Q - atypical solution that cannot be clearly specified using a code |