E-katalog skupiny BLOCK®
Revolving door-I 104.01/I
Together with the casing, this metal revolving door represents one of the basic elements to construct clean workplaces and areas with maximum safety, sterility, hygiene, easy maintenance and sanitation.
PRODUCT DESCRIPTION
Facing
- The facing of the door leaf consists of a molded tile produced by precision molding.
- Reinforcements are glued-in along the perimeter of the facing, in order to increase the rigidity of the door leaf.
- Reinforcement and filler are glued together under pressure.
Door wing
- The door leaf is solid or glazed with the PHARMA system, offering double-sided glazing where the glass pane is in plane with the surface of the door leaf.
- It is possible to install blinds in the space between the glass panels.
Casing
- Mounting into the partition.
- Casing is in line with partition.
 |
1) Casing
|
ADVANTAGES
- Magnetic locks - tongue extends until closing and no damage to casing the paint.
TECHNICAL DATA
| Door type |
|---|
| basic hinged door I |
| Swing direction |
|---|
| single wing left |
| single wing right |
| double wing |
| double wing |
| atypical |
| Atypical design - Double-leaf door with above-standard control of the fixed leaf In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing. Atypical finish - the customer requires a different hue than the casing - according to RAL colour standard. Up to a door width of 1200 mm and a height of 2200 mm, the door is fitted with two hinges as standard. |
| Door dimensions |
|---|
| 700x2100 |
| 900x2100 |
| 1100x2100 |
| 1300x2100 mm (active wing width 900mm) |
| 1500x2100 mm (active wing width 900mm) |
| 1700x2100 mm (active wing width 900mm) |
| In the case of an atypical active door wing, it is necessary to specify the dimensions of the active wing as part of the code. For example 1800/900/x2010 (clear width 1800, active wing 900, passive wing 900). |
| Grounding for zone I and II |
|---|
| Earthing for zone I and II |
| Earthing has not been done |
| Glazing size |
|---|
| solid door without glazing |
| glazing 1/3 |
| glazing 1/2 |
| maximum glazed |
| hinge side 2/3 mirror 400x1450 mm |
| 2/3 mirror on opposite side of hinges 400x1450 mm |
| atypical |
| Glazing is always placed in the center (axis) of the door with dimensions depending on the width of the leaf * double-leaf doors are glazed safety glass laminated with a thickness of 6mm active wing only. The glazing of the passive wing is an atypical design. In an atypical version, it is possible to adjust the glazing according to the customer's request, but always consultation with FC staff is necessary For glazing, it is also possible to use an internal window film to create the desired look, a suitable pattern can be selected from the Windows Films sample book. |
| Blinds type |
|---|
| without blinds |
| magnetic blinds on side of hinges |
| magnetic blinds on opposite side of hinges |
| atypical |
| Standard hue of blinds S156 (silver) according to the manufacturer's sample book, custom hues according to RAL colour standard. |
| Type of door control |
|---|
| automatic operator |
| manual |
| door closer |
| atypical |
| Hardware |
|---|
| handle |
| fixed doorknob |
| elbow switch (S10-E) |
| one-point panic exit push device |
| operable doorknob |
| stainless steel plug |
| not included in delivery |
| atypical |
| sensor switch (clean switch) |
| button (S10-E) |
| I. Hardware - on the side of hinges II. Hardware - on the opposite side of the hinges |
| Cylindrical insert |
|---|
| openings for lock and insert have not been cut out |
| standard cylindrical insert |
| not included in delivery |
| atypical |
| For S7-E it is always C0 - the opening is not cut out. |
| Drop seal |
|---|
| Dropseal ELLEN MATIC 2K |
| without strip |
| atypical |
| Protective bumper, kick plate - dimensions and finish must be specified in the notes to the door order. |
| Casing mounting |
|---|
| finish for partition panels 52mm |
| finish for partition panels 60mm |
| finish for partition panels 100mm |
| finish for a plasterboard wall (HSE) |
| Cladding frame for double partition 100 mm |
| Cladding frame for double partition 140 mm |
| finish for Surgical |
| finish to modular partition |
| atypical |
| Using an additional column |
|---|
| without column |
| column on the left |
| column on the right |
| Indication - type |
|---|
| without indication |
| Indication - type YDG |
| Indication - type Block |
| Indication - location |
|---|
| Without indication |
| with indication on the right on side without hinges SP-OZ |
| with indication on the right on side of hinges SP-PZ |
| with indication on the left on side without hinges SL-OZ |
| with indication on the left on side of hinges SL-PZ |
| with double-sided indication on the left SP-O/P |
| with double-sided indication on the right SP-O/P |
| atypical |
| Door wing blocker |
|---|
| without el. blocker |
| electromechanical solenoid lock ST-DB 100 |
| electomagnetic lock |
| atypical |
| Facing hue and material |
|---|
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| Powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| atypical design |
| In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes. |
| Casing hue and material |
|---|
| Galvanized metal sheet, powder coating (Komaxit), hue RAL 9016 |
| Stainless steel AISI 304 |
| Galvanized metal sheet, powder coating (Komaxit), hue RAL |
| RAL anti-bacterial varnish |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |